K&M - Controlled Depth Reamer 25-06 The decapping rod is supplied

The decapping rod is supplied with a standard size button

99301 Special Collet for 470 Nitro

520B adjustable from 4

accuracy and performance

K&M - Controlled Depth Reamer 25-06 The decapping rod is suppliedThe K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer. The chamfer angle is 4 degrees per side. The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even