Air Compressor Drain Hose Kit w/ Ball Valves: Fits 1/4" FPT Ports OIL Install components using non-drying liquid

Install components using non-drying liquid Teflon and never use Teflon tape

The main advantages of using an ALL-FLO Kynar air diaphragm pump for soft wash or low-pressure chemical application are listed as follows: The ALL-FLO 1/2" Kynar air diaphragm pump

Abrasion resistant outer cover

Reminder: Regulator supplied by PWP should be set to 80 psi maximum

Air Compressor Drain Hose Kit w/ Ball Valves: Fits 1/4" FPT Ports OIL Install components using non-drying liquidAir compressors drain hose kit w ball valves: fits 1 4" FNPT ports Release the pressure and drain the water from the bottom of both tanks of your compressor. Simply remove the ball valves from each tank, install the street 90's using liquid thread lock (5004). Install each hose. Install the replacement ball valve on the end of each hose and turn each valve into the off position. SKU: A. CDB