Spraytech Standard Pump Controller Additive Applicator Powered by a 20 litre

Powered by a 20 litre per minute 12 volt pump fitted with chemical resistant viton valves and a santoprene diaphragm

centre or all threeNozzles can also be adjusted up or down depending on spraying needsProduct includes boom only

Precisely controls pressure from 0 to 100 PSI when broadcast or spot spraying

Spray Pattern:

Spraytech Standard Pump Controller Additive Applicator Powered by a 20 litreSpraytech Standard Pump ControllerThis unit allows the operator a simple method of controlling 12V pumps of up to 10 amps. Up and down buttons vary speed output and there is also a built in on off button. Set Up The Controller will need the calibration to be set before it will drive the pump Please ensure on the pump is connected to the Controller and that all valves are open Set a flow rate then Press the enter and up buttons together ( 2 outside