3/8" ID x 10' Flexible Rubber Air Hose 300 PSI 1/4" MPT x 1/4" MPT CYLINDER HEAD 1" FPT polypropylene bulkhead for

1" FPT polypropylene bulkhead for tank pipe thread connection this is commonly used on the inlet of the Hudson or a pressure washer supply tank

The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode

0 Nozzle RotoJet 5800 PSI

Do not hard pipe plumb this filter

3/8" ID x 10' Flexible Rubber Air Hose 300 PSI 1/4" MPT x 1/4" MPT CYLINDER HEAD 1" FPT polypropylene bulkhead for3 8" ID x 10' flexible rubber air hose 300 psi 1 4" MPT x 1 4" MPT (Suitable for 1 2 ALL Flo, Yamada, ARO, Ingersoll Rand, 1 2" air diaphragm pump or pump with a 1 4" air port). If your pump has a 1 4" port, always upsize the air hose id at least one size up. We recommend a desiccant filter after the regulator and before the pump. Straight end and elbow end. Install the elbow end at the pump. Hose is 10' in length. SKU: HA06 10