12 Volt Pump Slotted Filter Suction Hose Assembly Crimped PVC 1/2” MPT POLY / PVC 0 GPM 2000 psi w/unloader/injector

0 GPM 2000 psi w/unloader/injector

invented the design of our PVC slotted chemical tank filter

Don't forget to purchase a street 45- high pressure steel (3361) or a street 45 brass low pressure (2354) or Softwash use to install where the hose connects to the reel to allow the hose to lay flat against the reel

PWP recommends adding SLO-MO 'Original' soft wash surfactant to your recipe to save time and money

12 Volt Pump Slotted Filter Suction Hose Assembly Crimped PVC 1/2” MPT POLY / PVC 0 GPM 2000 psi w/unloader/injectorThis is a non collapsible suction hose for use with a 12 volt pump, 1 2 air diaphragm pump or any pump in these related industries. The inlet of the pump must be 1 2" FPT. 12' long x 1 2" MPT crimped on a 1" inner diameter clear ag hose w slotted PVC filter. Installed with an elbow for top draw from tank and to allow user to fit the slotted filter end into the bung opening of a 55 gallon drum. You must fabricate and provide the PVC sleeve to slip over