1/2" Drill Chuck 120Nm with Carbide Jaws Replacement Caps allow it to set for

allow it to set for approximately 10 minutes to 3 hours depending on the material (45–60 minutes is ideal for wood)

200 W Sound pressure level LpA 84 dB Power output 750 W Measurement uncertainty of the measured value KpA 5 dB Backing pad Ø 9 [230] in[mm] Sound power level LWA 95 dB No load speed 900 - 2

The Vari-Grind 2 restrains both the side-to-side motion of the tool

Better protection

1/2" Drill Chuck 120Nm with Carbide Jaws Replacement Caps allow it to set forSolid metal drill chuck, made by Rhm, with carbide jaws and high clamping force. Screwdriver bit can remain in the drive shaft. The drill chuck fits over the bit. Maximum torque 1,062 [120] in lbs[Nm]. Compatible with all FEIN cordless drill drivers with QuickIN QuickIN MAX interface. Technical data Accessory interface QuickIN Suitable for the following tools ASCM 18 QM ABS 18 QC ASCM 12 Q Select ASCM 12 QC ASCM 18 QSW Select ABS 18 Q Select