Tork Craft | Chassis Screw Sheet Metal Punch 32mm Cordless_Drill 0Ah Pad Diameter

0Ah Pad Diameter

perfectly level and rugged surface for your router

hammer strike applications

payload 25kg Outside length 444mm Outside width 329

Tork Craft | Chassis Screw Sheet Metal Punch 32mm Cordless_Drill 0Ah Pad DiameterSheet Metal Punch The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a hole through sheet metal. It is a very simple tool that consists of a punch, die and screw. To set up the punch, first drill a pilot hole into a piece of sheet metal with a step drill bit, place the die over the draw stud before inserting the stud through the pilot hole. The punch is then threaded onto the tip of the draw stud and brought close to the sheet