Small Ondulator Corrugating Rolling Mill With 4 Sizes Prop 65 - Lead-Nickel 231 – Busch Carbide Circular

231 – Busch Carbide Circular Saw Fig 231F

depending on the sourcing of recycled Asian Padauk — but regardless of shade

the Maestro EX is lighter at 3

A single grommet at the front allows the apron to be hooked back and out of the way when not in use — particularly useful when soldering to protect the leather from accidental heat damage

Small Ondulator Corrugating Rolling Mill With 4 Sizes Prop 65 - Lead-Nickel 231 – Busch Carbide CircularThis smaller corrugating rolling mill also known as an ondulator is a simple, direct drive mill designed for adding a corrugated effect to thin gauges of soft metal sheet. It is used primarily for corrugating thin bezel wire and decorative sheet work. The mill must be mounted in a vise or attached securely to a workbench before use. For use with soft precious metal sheet up to 24mm wide. Best results are achieved with 30 gauge (0. 25mm 0. 010") sheet.