Tork Craft | Annular Hole Cutter HSS 46 X 30mm Broach Slugger Bit Type_Pipe Clamps Brushless motor - more power

Brushless motor - more power and prolonged operation

Rubberized soft grip provides more control and comfort

Use stiff brush  or a lint free cloth  and apply thinly and evenly to the clean and dry wood surface along wood grain

The spindle lock enables fast cutter change

Tork Craft | Annular Hole Cutter HSS 46 X 30mm Broach Slugger Bit Type_Pipe Clamps Brushless motor - more powerAnnular Hole Cutter HSS 46 X 30mm Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these