Tork Craft | Annular Hole Cutter HSS 42 X 55mm Broach Slugger Bit Type_Shredders Easily applied with a brush

Easily applied with a brush or cloth

through without much effort

DF-250 or DE-250

6-hole design engineered for increased dust extraction

Tork Craft | Annular Hole Cutter HSS 42 X 55mm Broach Slugger Bit Type_Shredders Easily applied with a brushAnnular Hole Cutter HSS 42 X 55mm Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these