Tork Craft | Annular Hole Cutter TCT 35mm Broach Slugger Bit - Various Sizes 32mm 35mm Annular Hole Cutter:30mm Spindle-lock system for easy change

Spindle-lock system for easy change of cutting equipment

and the guide fence can be repositioned to give you 37mm or 64mm setbacks

The diamond carbide tipped tool features indexable carbide inserts which will always keep you turning with a sharp edge

Clamping Faces: 3-3/4" (95mm) height by 1-7/8" (27mm) width

Tork Craft | Annular Hole Cutter TCT 35mm Broach Slugger Bit - Various Sizes 32mm 35mm Annular Hole Cutter:30mm Spindle-lock system for easy changeAnnular Hole Cutter HSS Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is